10.0 TO ADD / REVIEW / DELETE / MODIFY
HOLIDAYS
From the Run mode, press the RUN/SET key. The
TIME/DAY symbol is flashing. Press ADVANCE to go
to the HOLIDAY mode. When the HOLIDAY symbol is
flashing, press ENTER. H1 is flashing. If you desire
single-day holidays, press ENTER to select it. If not,
press ADVANCE to flash H2 (block holiday). Press
ENTER.
RVU will flash. If RVU is not flashing, then no holiday
of the selected type (H1 or H2) has been programmed.
Go to section 7 to program holidays.
- add
Press ADVANCE if you want to add more holidays
without reviewing. The dashes for month will flash.
Proceed as outlined in section 7.0.
- review
To review the holidays, press ENTER while RVU is
flashing. Each holiday will be displayed in sequence.
After the last holiday, the HOLIDAY symbol will again
flash.
- delete
To delete a holiday setting, press ADVANCE while the
holiday is being displayed and RVU is flashing. DLT
will begin to flash. Press ENTER. The holiday will be
deleted and the next one, if any, will be displayed.
Delete other holidays in the same way.
- modify
To modify a holiday setting, press ADVANCE two
times while the holiday is showing and RVU is flashing.
The month will begin to flash and RVU will stop flash-
ing. Use the ADVANCE key to modify the flashing
27
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
28
SIG. TIMER
information. Press ENTER to store the new informa-
tion. When finished, the next holiday, if any, will be dis-
played and RVU will flash again. Modify other holidays
in a similar fashion.
Press RUN/SET to quickly exit to the Run mode.
11.0 TO REVIEW / MODIFY / DELETE SUNRISE OR
SUNSET TIMES
NOTE: THE SUNRISE AND SUNSET TIMES CAN BE
REVIEWED IN THE SCH / RVU MODE BUT CANNOT
BE ALTERED OR DELETED IN THIS MODE.
Press the RUN/SET key once if in the Run mode or
twice if in another mode. The TIME/DAY symbol will
flash. Press ADVANCE to go to the LATITUDE mode if
you want to modify or delete the latitude or astro days.
If you desire to modify the offset times only, go to the
Sunset or Sunrise mode as needed. (See “-modify off-
set minutes” below.)
Press ENTER while the LATITUDE symbol is flashing.
The latitude degrees will start to flash. Use the
ADVANCE key to modify the setting. Press ENTER.
Channel 1 (C1) is flashing. Press ENTER to select it or
ADVANCE to flash channel (C2). Press ENTER.
- review
The previously selected days are showing and the bar
under Sunday is flashing. If no change is desired,
press the RUN/SET key to quickly exit to the Run
mode.
28
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
29
SIG. TIMER
SET
