7.1 TO SET SCHEDULE FOR HOLIDAY ONLY
Follow the procedure as outlined in section 4 for stan-
dard ON/OFF or section 5 for signals. When the bar
flashes under Sunday, press the ADVANCE key until
the bar under H1 or H2 flashes. Press ENTER for the
desired selection and continue as shown in the section.
8.0 TO ADD / REVIEW / DELETE / MODIFY
SCHEDULES
If you are in the Run mode, press the RUN/SET key
then press ADVANCE until the SCH/RVU symbol is
flashing. Press ENTER.
“C1” (or “t1”) is flashing. Press ENTER to select it or
press ADVANCE then ENTER to select channel 2.
RVU will be flashing. If RVU is not flashing, the chan-
nel has not been programmed. Go to section 4 or 5 to
program the channel.
- add
If you want to add schedules without reviewing, press
ADVANCE. Proceed as in section 4.0.
- review
Press ENTER while RVU is flashing to display the first
(earliest) setting. Continue to press ENTER to review
the other settings for the channel. After the last setting
is displayed, the display will show dashes and the
SCH/RVU symbol will begin flashing again.
- delete
To delete a setting, press ADVANCE while RVU is
flashing and the setting is being displayed. DLT will
begin to flash.
25
SU MO TU WE TH FR SA H1 H2
AM
HOLIDAY
TIME/DAY
DATE
SCH/RVU
RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
26
SIG. TIMER
Press ENTER while DLT is flashing to delete the set-
ting. The next setting, if any, will be displayed.
- modify
To modify a setting, press ADVANCE twice while the
setting is being displayed and RVU is flashing. RVU
will stop flashing and show steady. The bar under
Sunday will begin to flash. Use the ADVANCE and
ENTER keys to select new days or reselect the previ-
ous days. Modify the time and event information in a
similar manner. Press ENTER to accept the new infor-
mation. The next setting, if any, will now be displayed
and RVU will flash again. Continue as before.
Press RUN/SET to quickly exit to the Run mode.
9.0 TO REVIEW / MODIFY SIGNAL DURATIONS
From the Run mode, press the RUN/SET key to enter
the Set mode. The TIME/DAY symbol is flashing.
Press ADVANCE until the SIG TIMER symbol is flash-
ing. Press ENTER.
“t1” is flashing and the signal durations for channel 1
are being displayed both for Sig.A and Sig.B if previ-
ously set. If you wish to modify the settings, press
ENTER and use the ADVANCE key to change the
flashing information. Press ENTER to store the modi-
fied information. If you wish to see the signal durations
for channel 2, press ENTER again until the 1 flashes.
Press ADVANCE to flash “t2” then press ENTER.
The signal durations will be displayed with SIG.A dura-
tion flashing. Use the ADVANCE key to make
changes. If no change is desired, press ENTER until
the TIMER symbol is again flashing or press RUN/SET
to exit to the Run mode.
26
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
DLT
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
27
SIG. TIMER
AM
