The date digits will flash. Press the ADVANCE key to
set the holiday date. Press ENTER.
The date is entered into memory and the dashes flash
again. Program the other dates in a similar fashion.
After programming your last date, press ENTER while
the dashes are showing. The HOLIDAY symbol will
again begin to flash.
Press ADVANCE to proceed to another mode or
RUN/SET to go to the Run mode.
- To Set Block Holidays (H2)
From the Run mode, press RUN/SET. The TIME/DAY
symbol will flash. Press ADVANCE until the HOLIDAY
symbol is flashing. Press ENTER.
The bar under H1 is flashing. Press ADVANCE. The
bar under H2 is flashing. Display shows
Press ENTER. The display shows
23
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
22
SIG. TIMER
E
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
SIG. TIMER
23
SU MO TU WE TH FR SA H1 H2
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
24
SIG. TIMER
SET
The dashes for the start month of the block (St) is
flashing. Press ADVANCE to set the start month for
the block. Press ENTER.
The start date is flashing. Press ADVANCE to set the
block start date. Press ENTER. The display shows
This is the screen to set the end date for the block. The
left dashes are flashing. Press the ADVANCE key to
set the end month. Press ENTER.
The end date is flashing. Press the ADVANCE key to
set the end date. Press ENTER.
The start screen is again showing. You can now pro-
gram the next block holiday as before.
When all desired blocks are programmed and you
want to exit the mode, press RUN/SET to quickly exit
to the Run mode.
NOTE 1: Only 5 block dates are possible. The 6th
date is for the daylight savings time. (You
will see a bar over the ON or OFF when in
this position.)
2: All blocks must fall in the same calendar
year. If you have to extend a holiday into a
new year you have to divide it into 2 blocks.
End the first block on December 31 and
start the second block on January 1. -
Example: To program a block from Dec. 23
to Jan. 2.
Blk. 1: Start Dec. 23; End Dec. 31.
Blk. 2: Start Jan. 1; End Jan. 2.
3: Single-day holidays (H1) will take priority
over block holidays (H2) if they both occur
on the same date.
4: It is
NOT possible to program different
schedules for each block holiday. All blocks
are selected together when H2 is selected.
24
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
25
SIG. TIMER
SET
