24
Table of easy compact parameters
9
3. Oper
ation
I N S TA L L AT I O N O F T H E S H E LV E S
All of the equipment are provided with shelves with pilasters and the shelf supports clip.
The shelves are easily installed over the on the pilasters support clips that fit easily.
Align the shelves just as the smaller wires from front to back fill and place the shelf over the clips. (See
the Service Manual)
E L E C T R I C A L P R E V E N T I O N
Wiring should be performed by a qualified electrician in accordance with local electrical codes.
Ground wire separately shall be provided for all installations.
The properly connected equipment goes ensure proper operation.
Requirements for electrical feeding equipment are in the serial / data plaque. (See Fig1)
Fig1
Subtitles:
Recommended is a hotline., properly protected size appropriate from the facility's main source of
equipment
To ensure the correct voltage to be supplied, while the equipment this one in operation get a
voltage reading with the engine-compressor electric connections.
1. Serial
Number
2. Model
3. Voltage / Frequency ( V/
Hz)
4. Power
(W)
5. Current
(A)
6. Refrigerant
7. Quantity
Gas
8. IP - Protection
9. Electrical Resistance (W)
10. Illumination (W)
11. Climatic class
Содержание Romeo
Страница 2: ...2 31 ...