Toparc 058866, Руководство пользователя

Страница: 11 / 30

Mobile service stations
EN
11
On the dust bin
The machine contains dust deposits and potentially explosive atmospheres.
The operator must not place near or inside the machine, especially in the dust bin, possible sources of ignition such as:
flames, gas or hot surfaces, electric parts, electrostatic discharges, mechanical sparks.
On the rear panel
Technical specifications and ATEX marking label
INSTALLATION MANUAL
Package handling instructions
The machine is supplied in a box with overall dimensions and weight of 60x80x110 (H) cm – 30kg
comprising:
- wooden platform
- corrugated cardboard covering
- binding straps
The box must be handled and stored in an upright position. Do not place any objects on the package that weigh more
and/or have a different sized base than the box. Avoid knocking the package or damaging it when it is being moved.
Instructions for unpacking and disposal of packaging
Before opening the box, carefully examine its appearance. If it is damaged, shows signs of having been opened or the
documentation in the envelope attached to the outside is not complete, do not proceed but send the box back to the
sender taking suitable measures. Failure to do so will render the warranty void.
To unpack the machine:
- cut the binding straps;
- remove the corrugated cardboard covering
- take the machine off the wooden platform
- door Set aside the bag of accessories
Inspection of package contents
The package contains:
the vacuum suction unit equipped with connection pliers for equipotential circuit and pneumatic sleeve; the accessories
bag containing a dust bag and instruction manuals.
Parts of machine
1 – Suction pipe union
3 – Tool support
4 – Dust bin
5 – Vacuum head
6 – Ignition valve
7 – Grounding pliers
8 – Suction cleaner frame
9 – hose supports
10 – compressed air supply
11 – pneumatic tool plug
13 – castor wheels
Installation of machine
Place the machine on a stable and level surface. Verify that it is possible to connect the metal suction cleaner pliers to
the grounding system of the working area.
Connect the suction cleaner to the pneumatic sleeve supplied (see figure 1) with the machine and connect:
- The quick coupling to the pneumatic sleeve on the front right side of the suction cleaner;
- The suction head to the pipe union of the suction cleaner;
- Disconnect the supply pipe from the vacuum head using the quick fitting, then remove the vacuum head using the two
metal hooks (see figure 2);
- Place the dust bag inside the drum and firmly fix it to the sleeve (see figure 3);
- Place the vacuum head in the correct position above the drum and fix it using the metal hooks supplied;
- Connect the supply pipe to the vacuum head (see figure 4).