TH2883 Series Operation Manual Chapter 8 SCPI Command reference
8-17
Man
Int
<NL^END>
Ext
Bus
8.3.6 STATistic subsystem commands
The STATistic subsystem commands set the statistic function to ON or OFF, clear or save statistic
data. Figure 8-9 shows the STATistic subsystem command tree.
Figure 8-7 STATistic subsystem command tree
The [:STATe] command sets the statistic function to ON or OFF. The [:STATe]? query returns the
current state of the statistic function.
Command syntax:
ON
STATistic[:STATe]
OFF
1
0
Where,
1 (decimal 49)
When the function is ON
0 (decimal 48)
When the function is OFF
For example: WrtCmd( “STAT ON” ); turn on the statistic function.
Query syntax: STATistic[:STATe]?
Return format:<NR1><NL^END>
The :CLEAr command is used to clear the statistic data.
Command syntax: STATistic:CLEAr
The :SAVE command is used to save the statistic data to a file.
Command syntax: STATistic:SAVE