TH2883 Series Operation Manual Chapter 5 Introduction to [SETUP]
5-11
saved as the default name-<Unnamed>. Pressing ESC can exit the operation
of saving file. Letters from A to Z, numbers from 0 to 9, and underline, etc.
can be used for a file name.
Enter rules: Pressing a numeric key, the corresponding letters or
characters will be displayed on the screen. If user wants to input a
number, the numeric key should be pressed again. While a letter or
character is needed, then the soft key corresponding to the letter or the
character should be pressed.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the
cursor will move up, down, left and right.
5.5
Ext. File
Figure 5-4 shows the page of external file.
Figure 5-4 External file
The set parameters can be saved to a U disk (external file) in file format. External file storage
supports three extension names: .STA, .TXT, .CSV. Only .STA file has file load function. Soft
keys in the external file page are as follows:
Sub Dir
Enter the sub-directory. Using the arrow key or the roller to choose a file,
press Sub Dir to enter the sub-directory.
Note
：
When the cursor is locating in the folder zone, pressing the
roller down will also enter the sub-directory.
Parent Dir
Return to the parent directory.
Create
Create a new folder. Press Create and then input the name of the file folder.
End the creation of new folder by press ENTER. If user presses ENTER
