Introduction
The Tone Commander
40d
is an ISDN attendant console compatible with Lucent, Nortel, and Siemens
National ISDN, and Lucent Custom ISDN services. It is designed to access a maximum of 22 call
appearances via a single attendant loop. One to four
120d
120 station BLF/DSS consoles may be added to
simplify station call transfer.
Standard features of the 40d120 system include single button call answering, hold, transfer, conferencing,
automatic callback, direct station selection (DSS), name database, autodialing, line privacy, delayed
ringing, 4 line (40 characters per line) alphanumeric display, and digital clock. Configuration parameters
may be programmed by the installer to accommodate a variety of operating environments.
The 40d and 120d consoles use standard Electronic Key Telephone Service (EKTS) ISDN configurations
and connect directly to the Central Office ISDN “U” interface. No external NT1 is required. A separate “U”
interface line is required for the 40d and each 120d console.
Using This Manual
Tone Commander consoles are easy to install and configure. The step by step instructions in this manual
guide the installer through the installation, preliminary testing, programming, and operational testing of the
40d120.
Installation of a 40d120 consists of the following steps:
1. Order the equipment.
(page 6
)
2. Fill out the appropriate Translation Order Guides as required by the telco and order the ISDN lines.
(page 6)
3. Fill out the Configuration Sheets.
(page 43)
4. Attach the handset, cradle, and tie bracket to the console.
(page 31)
5. Connect the power supply to the consoles and ISDN lines.
(page 32)
6. Enter the console SPIDs and PDN.
(page 43)
7. Set up console key mapping, ringing call queues, recall timers, and call appearance loop usage as
required for this installation. Factory default settings may be adequate for many installations.
(page 47)
8. Enter the names and telephone numbers for DSS keys and caller identification.
(page 62)
9. Test the operation of the console.
Available features and ordering requirements vary somewhat among the ISDN service types offered by the
telcos. Features and installation steps that are specific to an ISDN service type or C.O. switch are noted in
this manual as follows:
– Lucent, Nortel, or Siemens National ISDN
– Nortel National ISDN-1 only
– Lucent National ISDN only
– Nortel National ISDN-2 only
– Lucent Custom ISDN only
– Siemens National ISDN only
Page 4
13-102633 Rev. H
Tone Commander 40d120 Installation Instructions
Call Tone Commander Customer Service at
(800) 524-0024
if you have any questions about features,
installation, or operation of the 40d120.
Nortel
National ISDN-1
National ISDN
Nortel
National ISDN-2
Lucent
National ISDN
Lucent
Custom ISDN
Siemens
National ISDN
Содержание 40d120
