Tone Commander 40d120, Руководство по установке

Страница: 47 / 142

Key Mapping
Most call processing functions can be assigned to any 40d key. All keys except the MAINT, VOL, SHIFT,
and Hold Loop keys are programmable. Available key assignments are listed below.
NOTE – Ring Delay and network features must be assigned to buttons with indicator lamps.
Key Type of Key Supplementary Info Required
Answer Local Function
Call Back
‡
Network Feature Enter 2-digit Automatic Callback Feature Activator
Call Forward Network Feature Enter 2-digit Call Forward Variable Feature Activator
(+ destination number
*
)
Park Network Feature Enter 2-digit Directed Call Park Feature Activator
Cancel Local Function
Conference Network Feature Enter 2-digit Conference Feature Activator (typically 60)
*
Connect Network Feature Enter 2-digit Transfer Feature Activator (typically 61)
*
Drop Network Feature Enter 2-digit Drop Feature Activator (typically 62)
*
Hold Local Function
Inspect
‡
Network Feature Enter 2-digit Inspect Feature Activator
Intercom 1-4 Network Feature Enter 2-digit Intercom Feature Activator
‡
or Call Appearance
*
Network Call Network Feature Enter 2-digit Feature Activator
Network
Feature Network Feature Enter 2-digit Feature Activator
Originate Local Function
Page Local Function Enter Paging DN (15 digits max.)
Pickup Network Feature Enter 2-digit Directed Call Pickup Feature Activator
Poll Local Function
Priority Call
‡
Network Feature Enter 2-digit Dial Call Waiting Feature Activator
Release Local Function
Ring Delay
On/Off Local Function
Split Local Function
Time/Date
‡
Network Feature Enter 2-digit Time/Date Feature Activator
Unpark Network Feature Enter 2-digit Call Park Answer Back
‡
or Call Park Retrieve *
Feature Activator
Voice Mail 1-2 Local Function Enter Voice Mail DN (15 digits max.)
* National ISDN ‡ Lucent Custom ISDN
13-102633 Rev. H Page 47
Tone Commander 40d120 Installation Instructions
National ISDN
With National ISDN, Feature Activation (button) numbers must be assigned for
Conference, Connect (Transfer), and Drop keys. These keys are preassigned
when the console is configured for Lucent Custom ISDN – see page 39.
Siemens
National ISDN
The Connect key should be programmed with the Conference feature
activator (typically 60) for Siemens National ISDN.