Tone Commander 40d120, Руководство по установке

Страница: 12 / 142

Translation Order Guide #1 (page 103):
Lines 1-4: Enter the Customer Name, Customer Contact, Service Address, and Billing number.
Line 5: Enter the Digital Subscriber Loop Telephone # (if known). This is the Primary Directory
Number of the 40d.
Line 6: Enter the 3-digit carrier access code for the desired long distance carrier.
Line 7: This is the Centrex Pick-up Group Number assigned by the telco, that includes the
40d and all terminals that are served by the 120d. Leave this line blank unless you
know the group number that will be assigned.
Line 8: Leave this line blank.
Line 28: This is the button assignment for the first call appearance of the Primary Directory
Number (PDN) listed on Line 5. Enter “1" for a primary 40d console. For multiple
console configurations, see page 73.
Line 29: This is the total number of sequential PDN call appearances that will be assigned,
beginning at the call appearance number listed on Line 28. For a single console
configuration, the recommended value is “8”. For multiple console configurations, see
page 73.
Line 37: Enter the telephone number from Line 5 under “Directory Number”, PDN Call
Appearance from Line 28 under “CA #”, and PDN Call Appearance Quantity from Line
29 under “CA QTY”.
Lines 38-41: For a single console configuration, leave these lines blank. For multiple console
configurations, see page 73.
Translation Order Guide #2 (page 104):
Enter any additional special feature key assignments. Make sure the associated BRCS Features on Line
24 of the Translation Order Guide #1 are entered. Typically, no modification to the standard form is
required. Make sure this form is sent to the telco along with the other appropriate Translation Order Guides.
Translation Order Guide #3 (page 105):
Lines 1-4: Enter the Customer Name, Customer Contact, Service Address, and Billing number.
Line 5: Enter the Digital Subscriber Loop Telephone # (if known). This is the Primary Directory
Number of the 120d for the first 60 DSS/BLF positions.
Line 14: Enter the Primary Directory Number for the second 60 DSS/BLF positions (Keys
61-120).
Line 37: Enter the telephone number from Line 5 under “Directory Number”
NOTE – One of these Translation Order Guides must be completed for each 60 stations appearing on a
120d console.
Translation Order Guides #4 and #5 (pages 106 and 107):
At the top of each form, enter the PDN of the 120d for the first 60 DSS/BLF positions from Line 5 of
Translation Order Guide #3.
For each DSS key, enter the directory number of the desired station to be monitored. Refer to page 42 for
DSS key locations on the 120d console.
Also enter the same directory numbers, with the station user names and autodial types, on the 120d
Configuration Sheets that are to be left on-site (pages 137-140).
Page 12 13-102633 Rev. H
Tone Commander 40d120 Installation Instructions
Lucent
Custom ISDN
Completing the Translation Order Guide for Lucent Custom ISDN