bruAPP/OS Network Settings
In the event that there are network changes that need to be made, the “Network” option of the System
Configuration Menu will enable you to make any changes to any of the following network options:
• IP address for ETH0 and ETH1
• Subnet Mask for ETH0 and ETH1
• DNS 1, DNS 2, or DNS 3 servers
• Gateway IP address
• bruAPP system hostname
Changing any of these options will affect any network operations that are currently running, such as
backup/restore operations or users using the bruAPP Web Interface.
bruAPP/OS Network Configuration
From the System Network Configuration menu, use the “Configure” option the make changes to the
Ethernet settings, DNS, hostname, Gateway IP, and Subnet Mask.
bruAPP/OS Network Test
To assist in troubleshooting network issues on the bruAPP Backup Appliance, there are two tests that
get performed for network configuration testing.
The first is an IP ping test. To conduct a general connectivity test, on the first screen (figure 8.8) enter
the IP address of a system that is known to be connected to the network and working as expected. The
IP address can also be an internet IP address to test internet connectivity from the bruAPP.
Figure 8.8
―
Network Connectivity test using 'ping' to ping an IP address.
Once an IP address has been entered, select OK to conduct the test. Four ping attempts will be
performed from the bruAPP to the IP address provided. See figure 8.9.
34
