Figure 7.4
―
Hostname, Gateway, and DNS server configuration.
Once you have finished with the Host Configuration of ETH0, you will be moved to the configuration of
ETH1.
Configure Ethernet Port 1
Most bruAPP users will not configure the bruAPP to use ETH1 since most connect the bruAPP to a
single network. If that is the case, then choose the “Disabled” option for ETH1 and press [ENTER] to
move to the next screen.
If you are connecting the bruAPP to two different networks, then perform the setup for ETH1 in the
same manner that you did for ETH0 using the second network values you want to be used.
Apply Network Settings
Once you have configured the settings for both Ethernet ports, the bruAPP/OS will now apply the
settings, creating the appropriate files for proper network connectivity.
If DHCP is used, the IP addresses for ETH0 and ETH1 can be logged in the “Saved Settings” section of
this manual.
Setting the Date & Time
The configuration of the bruAPP system date and time is first done manually, then you'll be prompted to
configure the NTP settings.
Set the Date
Setting the date on the bruAPP/OS consists of selecting the Month, Year and the Day, in that order.
Use the [TAB] and arrow keys to switch between fields and the change values within each field. Your
date screen should look like figure 7.5.
22
