6 - Powering On Your bruAPP
Depending on the bruAPP Backup Appliance that you ordered, the power button my be behind a
faceplate, on the back of the unit, or may require a small pen or screwdriver to power on. Please use
the appropriate section below for your bruAPP model.
Turn the unit on using a small tool such as a pen or small star screwdriver (do NOT use a pencil as lead
particles could interfere with the switch operation over time).
Tower Systems
For
tower
systems, turn the unit on using the front panel power switch. If the unit does not turn on,
check the switch on the power supply on the back of the unit and make sure that it is switched to the on
position.
1U Rackmount Systems
For
1U rackmount
systems that have a faceplate/bezel, unlock the faceplate/bezel and remove by
grasping the left end and swinging it outward from left to right. See figure 6.1. As chassis designs may
vary between bruAPP models from the 1U unit described and shown below, your faceplate/bezel
removal process may differ slightly.
Fig. 6.1
―
Removal of the 1U chassis faceplate/bezel.
Once the faceplate/bezel has been removed, locate the Power and Reset switches. See figure 6.2.
Power the bruAPP on by pressing the Power switch.
Figure 6.2
―
Location of power and reset switches.
18
