Using the arrow keys, highlight the option you want to have ETH0 be set to. Either manually set (static
IP) or if the ETH0 port will use DHCP. See figure 7.2.
Figure 7.2
―
Network Setup for ETH0.
Once you have highlighted “DHCP” or “Manual” for ETH0, press the [SPACEBAR] to select that option.
Once the option is selected, press [ENTER] to move to the next screen.
If you selected “DHCP” then you will be moved to the ETH1 port configuration screen.
If you selected “Manual”, enter the IP address and network (subnet) mask that the ETH0 port will be
using. Press [TAB] or use the arrow up/down keys to move between fields. See figure 7.3. Once
you've entered the desired values, press [ENTER] to continue to the next screen.
Figure 7.3
―
IP and Network Mask (Subnet Mask) settings for ETH0.
Once you have configured the IP address and network mask it is now time to configure the bruAPP's
hostname, gateway server and DNS servers. See figure 7.4.
Make sure that the hostname you enter is a unique name and is in a Fully Qualified Domain Name
(FQDN) format (i.e. bruapp.domain.com). Entering just the hostname may cause network errors.
21
