TOHATSU EverRun MX 18E2, Руководство по обслуживанию

Страница: 268 / 404

6-28
Lower Unit
2st X18E2 2012
GB
2
3
4
1
2
2
1
a a
a
Support point
19) Removing Drive Shaft
1. Remove pinion (B) gear nut, and then, remove pinion (B)
gear
1
and drive shaft
2
.
Bevel Gear Nut Socket
3
:
P/N. 350-72232-0
Bevel Gear B Nut wrench
4
:
P/N. 346-72231-0
· Degrease pinion (B) gear nut completely so
that the nut wrench does not slip on the nut.
· Loosen and remove the nut by using a drive
shaft socket and a wrench and turning the
wrench counterclockwise. Cover the wrench
4
with rag to prevent it from hitting the case
directly.
· This work can be made easier when the
opening of gear case of propeller shaft side is
faced upward and fixed horizontally with a
holder.
20) Disassembly of Drive Shaft
1. Remove drive shaft bearing
1
.
Do not reuse removed bearing. Be sure to
replace with new one.
CAUTION
Universal Puller Plate
2
:
P/N. 3AC-99750-0
· Check bearing for play or deflection before
removing, and replace if necessary.
· When putting universal puller plate on the
bearing, hook the tip of puller's claw on the
inner race of bearing correctly.
21) Inspection of Drive Shaft
1. Check drive shaft for bend and wear. Replace if necessary.
2. Measure drive shaft runout.
Runout Limit : 0.5 mm (0.020 in)
MX18EFS̲ch06̲120622.qxd 12.6.22 2:43 PM ページ 28