Timespace X300 Series, Инструкция по эксплуатации

Страница: 92 / 94

92
<8.curr_ts>
Description: Current X300 system timestamp.
Format is “hhmmss ddmmyy” or “hhmmss mmddyy” depending on menu setting (OTHER>TIME AND DATE
mode option).
Note that there are no separator characters in the time and date strings due to message size limitations.
Content:
Current timestamp - Timestamp.
<9.last_rec_file_ts>
Description: The timestamp of the last recorded file (i.e. newest file).
Format is “hhmmss ddmmyy” or “hhmmss mmddyy” depending on menu setting (OTHER>TIME AND DATE
mode option).
Note that there are no separator characters in the time and date strings due to message size limitations.
Content:
Last file timestamp - Timestamp.
„–„ - There are no recordings on disk.
<10.led_status>
Description: X300 front panel LED status.
Contents:
“R” - Record LED is ON.
“S” - Service LED is ON.
“F” - Fail LED is ON.
„–„ - No LEDs are on (with exception of the power LED).
The information under the remaining headings pertains to the last service or fail log (newest log).
If the Service and/or Fail LED are reported as ON under the previous heading, then the last service or fail log
information is included in the message.
If no service or fail logs are available (e.g. if a service log reset has been performed), then no log information
will be available.
<11.log_ts>
Description: The timestamp of the last service log.
Format is “hhmmss ddmmyy” or “hhmmss mmddyy” depending on menu setting (OTHER>TIME AND DATE
mode option).
Note that there are no separator characters in the time and date strings due to message size limitations.
Contents:
Log timestamp
– timestamp
“–” – May be blank if no log.
<12.log_mode>
Description: Service log mode, e.g. Service, Failure.
Contents:
Mode text
– Mode text.
“–” – No mode available or no log available.
<13.log_code>
Description: Service log code relating to mode.
Contents:
Code text
– Mode text.
“–” – No code available or no log available
<14.log_desc>
Description: Reason for service log.
Note: Due to message length constraints, this information may be partial or
missing.
Desc text
– Log description text.
“–” – No logs available.