25
SERVICE AND FAIL LED
The Service and Fail LED‟s on the X300 front panel give a positive indication that a system fault has
occurred. If the Service LED is lit then the system will most likely be functional but may not be
performing as intended. An example may be one of the cameras has failed. If the Fail LED is lit then
the system will not be functioning and requires immediately attention. An example may be that the hard
disk cartridge has failed. The Service/Fail conditions are stored on the X300 for review. Each condition
has an identifiable code and associated description. The service log can be viewed here; SETTINGS
MENU > ADVANCED > VIEW SERVICE LOG menu. The LED will remain lit and the problem which
caused the Service LED to light will be listed in the log until the log is reset by selecting RESET
SERVICE LOG.
SERVICE CODE
CODE DESCRIPTION
POSSIBLE ACTION
101-116
Open circuit. No current on power input to camera ** and no
camera signal.
Check Camera & Cables
201-216
Short circuit. Over-current on power input to camera ** and no
camera signal.
Check Camera & Cables
301-316
No signal. Camera disconnected for cameras **.
Check Camera & Cables
811
CAM:DISCONNECTED CAMERA
Check Camera & Cables
815
SYS:TIME ERROR. The real time clock was out of sync by
more than +-10 seconds when the time was updated over GPS
/ LAN.
Check / update system Time.
817
SMS:MODEM SEND ERROR
Check SIM Card/Cable/Power
818
SMS:DIAL OUT FAIL
Check SIM Card/Cable/Power
819
SYS:SMTP FAIL
SMTP error - failed to send email.
840
CAM:INTERMITTENT CAMERA
Camera disconnect detected more than four
times - suspect intermittent camera
863
USR:LOG RESET
System Log Reset By User. No action, for
information only.
864
HDD:DELETE ALL FILES FAILURE
HDD delete all rec files failed (must have been an
unscheduled reboot during the process).
865
HDD:SECURE DISK WIPE FAILURE
HDD card secure card wipe failed (must have
been an unscheduled reboot during the process).
866
SD:DELETE ALL FILES FAILURE
SD card delete all rec files failed (must have
been an unscheduled reboot during the process).
867
SD:SECURE CARD WIPE FAILURE
SD card secure card wipe failed (must have been
an unscheduled reboot during the process).
900
Failure to Write Packet(s) Hard Disc. Recording is not possible. Check disk
901
Failure to Read Packet(s) Hard Disc. Playback is not possible. Check disk
902
Failure to Write Sector(s) Hard Disc. Recording is not possible. Check disk
903
Failure to Read Sector(s) Hard Disc. Playback is not possible. Check disk
904
Failure to Read/Write SD Card.
Check SD card
Содержание X300 Series
Страница 18: ...18 X300 DIGITAL RECORDER...
