Timespace X300 Series, Инструкция по эксплуатации

Страница: 68 / 94

68
LAN
Allows the user to change the parameters of the LAN system. LAN STATUS indicates whether
the X300 is currently connected to a LAN or not.
IP ADDRESS - Enter static (fixed) IP address that the X300 is to be assigned on the local area network.
The default ip address is
10.0.0.200
SUBNET MASK - Enter the subnet mask as applicable for the LAN the X300 is connected to. The
defaults is 255.255.255.0
GATEWAY - Enter the gateway IP address of the default gateway the X300 will communicate with on
the LAN.
DNS PRIMARY/SECONDARY - Enter the Domain Name System server address that you wish to use.
Defaults to Google's primary/secondary.
DHCP - Enables/disables automatic IP address allocation. If there is a Dynamic Host Configuration
Protocol server/router on the network it will assign an IP address to the X300, else assign it manually
and turn this feature off.
PING TEST - Enter a destination IP address to send a network packet to for testing connectivity.
BYTES SENT / RECEIVED updates in real-time to show how many bytes are being transferred to and
from the X300.
RECORD DURING TRANSFER allows or disallows the X300 to record whilst LAN transfer is taking
place. If set to YES, then the X300 will continue to record during transfer. If set to NO, recording will
stop during transfer and return to the previous recording mode after transfer.
LAN IDLE TIMEOUT - Sets the number of minutes after the last LAN activity an ALARM output will stay
active for. This timeout is to be used in conjunction with the ALARM OUTPUTS.
TIME ADJUST PORT configures the network port number that the X300 will listen for time adjust
broadcasts.
MAC is the unique hardware identifier for the network interface on the X300.