Timespace X300 Series, Инструкция по эксплуатации

Страница: 89 / 94

89
WARNINGS
 THE USE OF HARD DISK CARTRIDGES OTHER THAN THOSE SUPPLIED BY TIMESPACE
TECHNOLOGY WILL INVALIDATE THE WARRANTY OF THE X300 RECORDER AND WILL
CONSTITUTE A BREACH OF THE X300 OPERATING SOFTWARE COPYRIGHT.

THE PURCHASE OF USB KIT T605-USB INCLUDES THE NECESSARY LICENSE FOR USE OF
PCLINK SUITE SOFTWARE ON ONE PC, INCLUDING FREE OF CHARGE UPDATES. REASONABLE
USE ALLOWS A SECOND INSTALLATION ON A PORTABLE COMPUTER PROVIDED BOTH
INSTALLATIONS ARE NOT USED SIMULTANEOUSLY. TIMESPACE TECHNOLOGY DOES NOT
AUTHORISE THE UNLICENSED USAGE OF PCLINK SUITE SOFTWARE.
 THE X300 RECORDER MUST ALWAYS BE MOUNTED SO THAT THERE IS A FREE FLOW OF AIR
AROUND IT. IF IT IS MOUNTED IN AN ENCLOSURE, IT IS ESSENTIAL THAT ADEQUATE
VENTILATION IS PROVIDED, AND IT IS RECOMMENDED THAT A FAN IS INCORPORATED IN THE
ENCLOSURE DESIGN.
 IF THE X300 RECORDER IS MOUNTED IN A VEHICLE, OR OTHERWISE SUBJECT TO VIBRATION,
SUITABLE DAMPING MUST BE BUILT INTO THE MOUNTING.
 HARD DISK CARTRIDGES ARE SENSITIVE TO SHOCK, VIBRATION AND HUMIDITY AND MUST BE
USED WITHIN OPERATING TEMPERATURE RANGE AS DETAILED IN THE X300 SPECIFICATION.
 IT IS HIGHLY RECOMMENDED THAT RECORDING IS STOPPED BEFORE POWER IS REMOVED
FROM THE X300 TO AVOID LOSS OF DATA. IT IS ALSO RECOMMENDED TO STOP RECORDING
BEFORE THE CARTRIDGE IS REMOVED.
 CARTRIDGES SHOULD BE SAFELY REMOVED FROM WINDOWS OPERATING SYSTEM
ENVIRONMENT PRIOR TO REMOVING POWER/USB CABLE. DATA LOSS OR CORRUPTION MAY
OCCUR IF THIS IS NOT FOLLOWED.

DO NOT WET THE PRODUCT WHEN CLEANING.
 THIS PRODUCT CONTAINS A LITHIUM BATTERY. DO NOT RECHARGE, OPEN, HEAT OR DISPOSE
OF IN FIRE. DISPOSE OF ACCORDING TO LOCAL REGULATIONS.
 X300 MAY BECOME UNUSABLE IF POWER TO THE UNIT IS LOST DURING A SOFTWARE
UPGRADE.
 WHEN REVIEWER IS CONNECTED TO X300 THE POWER SUPPLIED TO THE X300 MUST BE 12V+/-
1.2A.