41
The following commands will READ the status of the ALARMIN pots:
#ALARMIN1<R>
- Returns the status of the ALARMIN1, 0 = off, 1 = on
#ALARMIN2<R>
- Returns the status of the ALARMIN2, 0 = off, 1 = on
#ALARMIN3<R>
- Returns the status of the ALARMIN3, 0 = off, 1 = on
#ALARMIN4<R>
- Returns the status of the ALARMIN4, 0 = off, 1 = on
#CAMTEXT
#CAMTEXT_1_HELLO WORLD<R>
-
“Hello world” will be written at the top left hand corner
#CAMTEXT_3_<255><255><255>HELLO<R>
-
“Hello” will be written on the 4 line on camera 3
If text has been assigned to a camera, simply issuing blank text will clear all RS232 overlay text from
that camera. A maximum of 49 characters may be sent to the screen including new line control codes.
E.G #CAMTEXT_3_<R> will clear the text (please note the space after 3)
#SETCAMTEXT_<1-16>_<TEXT><R>
Sets the camera text as via the Camera Options menu on the X300. 1-16 is the camera selection
followed by the actual text. This is fixed to 12 characters per camera.
#SETFILETEXT_<TEXT><R>
Sets the filename text for the X300 file system to use. Max 12 characters.
#LOGRESET<R>
Resets the service log
#LOGREAD<R>
Reads the service log and returns up to the 10 latest entries
Examples
CAMERA_1<R>
switch to camera 1 (either in live/auto view or during playback)
XPLAY_0.5<R>
plays forward at half speed
XPLAY_-3.2<R>
plays in reverse at 3.2 times real time rate
XPLAY_10<R>
plays forwards at 10x speed
SETTIME_12:23:23<R>
sets the time in the format HH:MM:SS
SETDATE_23/09/05<R>
sets the date in the format DD:MM:YY
#GETTIME<R>
to which 12:23:23<R> is returned
#GETDATE<R>
to which 23/09/05<R> is returned
#LED1_1<R>
turn LED1 on
#CAMTEXT_1_Hello><R>
writes “Hello” to the console at record time in the top left corner.
A windows demonstration tool is available upon request by emailing
Содержание X300 Series
Страница 18: ...18 X300 DIGITAL RECORDER...
