Timespace X300 Series, Инструкция по эксплуатации

Страница: 11 / 94

11
X300 Front Panel
RECORD BUTTON
Turns configured recording mode on and off. Button can be disabled within menu settings.
LED
’s
Pwr - Illuminated when the X300 is powered (Green LED).
Record - Illuminated Red when the X300 is recording (flashing when in Motion Detect mode).
Disk - Pulses Green/Red when the X300 is reading/writing to/from the Cartridge or SD card.
SD - Pulses Orange when the X300 is reading/writing to/from the SD card.
Fail - Illuminated Red when any of the Fail conditions are met (refer to Service / Fail page).
Service - Illuminated Orange when any of the Service conditions are met (refer to Service / Fail
page)
At Power On -
All LED‟s will illuminate whilst the X300 initialises and will remain lit during system
check (menu disabled) until the unit is operational. Once operational only the Pwr LED will remain
illuminated unless recording is taking place.
CARTRIDGE LOCK
Locked - Securely locks the removable cartridge in place and enables it for use.
Unlocked - Turns off the cartridge, releasing it for removal.
SD CARD
The X300 supports a single SD card for two configurable functions:
Dual Recording - The X300 menu settings can be configured to record up to 25 images per second to
the SD card in addition to primary images per second being recorded to the cartridge.
All additional data for example audio and gps are also included within the SD recorded
files.
File Download - Files that are recorded on the X300 Cartridge can be selected and copied to the SD
card for review on a PC.
SD Card Compatibility
The X300 supports SanDisk SDHC Ultra or Extreme cards only . Sizes
include 4GB, 8GB, 16GB and 32GB. Both 15 and 30MB/s SD cards are compatible however for best
Audio playback results, 30MB/s is recommended.