Timespace X300 Series, Инструкция по эксплуатации

Страница: 62 / 94

62
FILE SYSTEM
Sets the parameters of the file system and how files are laid to disk. RECORDING MODE sets either
LOOP RECORD (oldest files will be overwritten first when the hard disk cartridge is full) or SINGLE
PASS recording (recording will stop when the hard disk cartridge is full).
FILE LENGTH controls how often a new file is created. A new file is created each time recording starts.
The file will be named with the date/time when the recording started. If continuous recording, the next
file will be started as per the file length settings or when next time boundary is met. For example when
using 10min files, if recording starts at 10:03, the first file will contain 7minutes of video and the second
file will be started at 10:10, then every 10 mins after a new file will be created. Files can be configured
for; 5 min, 10 min, 1 hour or Unlimited. For unlimited, a new file will be created when it reaches 4GB in
size (limited by the X300 FAT file system).
FILENAME TEXT prefixes the recording files with up to 12 user defined characters (0-9, A-Z, space).
WRITE PROTECT ALARM REC selects whether alarm recording files are write protected. If alarm files
are write protected they will not be deleted on LOOP recording.
WRITE PROTECT SHOT REC selects whether shot recording files are write protected. If shot files are
write protected they will not be deleted on LOOP recording.
FILE PASSWORD PROTECTION - a four digit password can be setup to protect files from
unauthorised playback using PCLink. PCLink will prompt for the file password in order to playback the
file in Windows.
NB - there is no master unlock for this feature so passwords must be very carefully
managed.
FILE SYSTEM CHECK menu configures whether the file system is checked (and possibly corrected) at
power up and also if a system log is created.
ON POWER SIWTCH ON: QUICK, FULL or NO check can be selected. Quick is default (and
recommended).
PERFORM CHECK ONLY NOW will check the files and file system and report any errors but will not
attempt to fix anything.
PERFORM CHECK AND CORRECT NOW will perform a file and file system check and fix any errors
that are found. It also rewrites the FAT and BOOT sectors.
NB No XBA files/data are deleted during this
function.