Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 60 / 180

5--25 50
THIRD PROGRAMME
PROGRAMMING CUTS
120
15
3
PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
°
CUT =
WIDTH =
0
°
0’
0.0
"
After setting all the cutting programs, press ENTER. The last value entered
will be memorized and the display will scroll to the next program.
PROGRAMMING CUTS
30
630
4
PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
°
CUT =
WIDTH =
0
°
0’
0.0
"
Once the programs have been set, press the RUN/PROG button to quit Cut
Programming.
"
After pressing the RUN/PROG button, the display will show the Program-
ming screen. Now the programs to be executed must be communicated to the
controller. To do this press F2.
PROGRAMMING
F1 = PROGRAMMING CUTS
F2 = PROGRAMME SELECTION
F3 = SEL. PROG. LOOP
"
Set the sequence of programs to be executed, up to maximum 32. The display
screen shows the cursor in position A, and the last program numbers set in
order of execution. There is no limit in relation to the programmable order,
whether it be in increasing, decreasing, repetitive or jump order, nor in rela-
tion to the minimum number of programs.