Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 58 / 180

5--23 48
press the numeric key1: the old value will automatically be replaced by the
new one.
PROGRAMMING CUTS
PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
°
CUT =
WIDTH =
12
331
2002.2
0
°
0’
0.0
"
After pressing 1, press ENTER. With this operation you will obtain two re-
sults:
1) the desired program number is memorized;
2) the reverse moves to measure, which means that it is possible to change its
value.
PROGRAMMING CUTS
1
200.2
331
PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
°
CUT =
WIDTH =
0
°
0’
0.0
"
With the reverse on MEASURE the value of the first batch of pieces to be cut
can be entered, i.e. L=178; to enter this value press the numeric keys in or-
der. Any typing mistakes can be deleted by pressing CLEAR. After digiting
the numbers, press ENTER; the reverse will pass to CUTS No.
PROGRAMMING CUTS
1
331
178
PROGRAMME Nº=
MEASUREMENT=
Nº OF CUTS =
θ
°
CUT =
WIDTH =
0
°
0’
0.0
"
Repeat the same operation to set the number of cuts; press in order the nu-
meric keys 5 and 0. After digiting the numbers press ENTER. With this ope-
ration you will obtain two results:
1) the new value is memorized;