Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 136 / 180

MEP S.p.A.
7--4 126
Use and maintenance manual TIGER 370 CNC--MR
"
The fourth dip---switch in the bench B, together with the RV6 potentiometer,
determines the current values for the feeder step motor: set the dip---switch
ON.
"
Rotate the trimmer RV6 till displaying 0, which corresponds to a 10---A cur-
rent.
"
Set again the dip---switch B---4 OFF.
SURFACE B CONFIGURATION
1 2 3 4 SCREW PITCH
OFF ON ON OFF 5
Chapter 6 contains the tables which illustrate the allowable configurations of
the driver.
"
Set the current screw step values on the control console: e.g. SCREW---STEP
= 10 (1/2 step) and REV. STEP = 400.
"
The driver can now be carefully put back into its original position. Restore the
machine.
STEP MOTOR
RUN/PROG = PREVIOUS MENU
MEASURE UNIT = mm
SCREW STEP = 10
MAX QUOTA = 1005.5
ABOVE ZERO = 5.0
REV. STEPS = 400
ACCELERATION = 16
HEAD CYL.BREAKDOWN.ZERO SET= 1000
HEAD CYL.BREAKDOWN.ABOVE ZERO=00000
HEAD CYL.BREAKDOWN.MANUAL = 2000
HEAD CYL.BREAKDOWN.MAX.FORWARD=6000
HEAD CYL.BREAKDOWN.MAX REVERSE=6000
N.B.