Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 41 / 180

MEP S.p.A.
5--6 31
Use and maintenance manual TIGER 370 CNC--MR
Lubricant/coolant fluid supply
It is possible to select the operating mode of the coolant by means of the specific
buttons on the control panel:
Technological control parameters
The following table indicates the control parameters which are shown on the
displays of the semi---automatic, automatic and Automatic Loop operating cycles.
X =1000,5 X---axis dimension (position of feeder carriage)
θ
=00,00
Nonoperating
W =000.0 Nonoperating
F =0 Cutting head descent speed potentiometer
S = 15
Disc rotation speed (rpm)
Kg=000 Nonoperating
DL=0 Nonoperating
SL= 3
Blade thickness (depends upon machine model)
AM=5,8 Max. blade motor absorption
A =0,7 Amperometer
T =00,00
Partial cutting time
TT=00,00 Total machine time for the cutting cycle
Preliminary check list for cutting operation
To guarantee complete safety during cutting cycles, the operator should work
through a check list of the entire apparatus, checking:
"
ensure that the disk guard completely surrounds the tool when it is not in use;
"
that the work piece is properly clamped in place;
"
ensure that the blade teeth are appropriate for the material being cut;
"
that the speed selected is right for the kind of piece to be cut;
"
that all protections are in place and correctly locked;
"
lubricant/coolant level and activation of the electropump;
"
the blade downstroke speed must be correct.