Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 38 / 180

5--3 28 Description of machine operation
Jet of lubricant/coolant fluid from taps,
only when the cycle has started
No lubricant/coolant fluid jet
Button for memorizing the FCTI (Head
Upstroke Limit)
Button for memorizing the FCTA (Head
Downstroke Limit)
Button to open and close the timed door
of the cutting head
Chip discharger unit in manual mode
Chip discharger unit deactivated Chip discharger unit in automatic mode
Decimal point for entering numerical
values in tenths of a millimetre or thou-
sandths of an inch when programming
parameters and cutting lenghts.
Selecting operating mode
F0: Function Key:
Takes you from single to multiple pro-
gramming in automatic work mode
F1: function key
At machine start up, it allows program-
ming the setup parameters.
F2: Function key not operational
F3: Function Key:
Selects semi---automatic work mode in
the main menu
F4: Function Key:
Selects Automatic work mode in the
Main menu
F5: Function Key:
Resets total cutting time counter in
semi---automatic work mode
F6: Function Key:
Selects diagnostic work mode in the
main menu
zeroing command
Enables step=length check in automatic
work mode
F7: function key
in automatic mode it enables the selec-
tion of the single cycle i.e. the basket
change cycle, or the continuous cycle
F8: Function Key:
---Allows operator to enter blade thick-
ness value in automatic work mode
F9: Function Key:
Takes you from the first display to the
zero---setting display
Takes you from the zero---setting display
to the main menu
Takes you back to the main menu