Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 169 / 180

10--5 159 Troubleshooting
Digital outputs CARD IUD 2
Digits 0 and 1 on the top line of the display indicate the OFF (0) or ON (1) status
of each output; press relative activation (y+) or deactivation keys (y---), to check
functioning; but press Reset beforehand to enable output:
Non operating
Chip discharger unit
Inverter blade motor start
Non operating
A321 12345678
IUD 000 : 00000000
Non operating
Non operating
Non operating
Non operating
IUD card 2 digital inputs
The numbers 0 and 1 shown on the bottom line of the display, indicate whether
the OFF (0) or ON (1) status of each input; pressing the relative activating (y+)
or deactivating (y---) buttons, it is possible to check their operation;
Non operating
Non operating
Non operating
Inverter Failure
Non operating
Non operating
Non operating
A321 12345678
IUD 000 : 00000000
I : 10001111
Non operating
Input card IUV
Forward and reverse speed of the feed step motor can be controlled in the
following way: digits 1 to 5 reverses the feed carriage at progressive speed, in the
same way, digits 6 to 0 for forwarding;
Feed carriage progressive forward
Feed carriage progressive reverse
MPP AXIS X: 1-5 = REVERSE, 6
÷
0= FORWARD
Blade motor absorption appears expressed in Ampers once blade inverter motor
start has been activated in CARD no. 2. The head position visualises the cutting
value transmitted by the cylinder head transducer which is between 1 and 255 and
represents the current head height.
Head position
Non operating
MOT AXIS L = 000 HEAD POS = 000
BLADE TENS = 000 BLADE DEV = 000
Blade motor absorption
Non operating
The blade motor maximum absorption visualises the cutting force value between
1 and 199 which is transmitted by the inverter by means of the potentiometer
rotation on the control board.