Tiger 370 CNC--MR, Руководство по эксплуатации и обслуживанию

Страница: 168 / 180

MEP S.p.A.
10--4 158
Use and maintenance manual TIGER 370 CNC--MR
Diagnostics
Once you have opened the diagnostics menu, a set of characters, each correspon-
ding to INPUT and OUT PUT signals on the MEP 24 controller are displayed.
For further information, refer to the electrical and electronic diagrams illustrated
in chapter 6 of this manual.
The IUD---IUV card are mounted inside the MEP 24 controller.
Legend of navigation and reading keys
Previous parameter key
Activate
Deactivate
Next parameter key
X+ = SHIFT DX, X- = SHIFT SX, Y+ = 1, Y- = 0
Digital outputs
Digital inputs
No. signal identification
Configuration card
A321 12345678
IUD 000 : 00000000
I : 00000000
Digital outputs CARD IUD 1
Digits 0 and 1 on the top line of the display indicate the OFF (0) or ON (1) status
of each output; press relative activation (y+) or deactivation keys (y---), to check
functioning; but press Reset beforehand to enable output:
Non operating
Non operating
CMA open/close
Liquid coolant electric pump
Lock/Unlock
Blade cover
Non operating
CMT open/close
A321 12345678
IUD 000 : 00000000
Non operating
IUD card 1 digital inputs
The numbers 0 and 1 shown on the bottom line of the display, indicate whether
the OFF (0) or ON (1) status of each input; pressing the relative activating (y+)
or deactivating (y---) buttons, it is possible to check their operation;
Foot pedal start (optional)
Air presence pressure
switch
Feeder carriage forward limit switch
Limit switch for bar in cutting vice
Blade cover limit switch
Feeder forward limit switch
Front protection bar
A321 12345678
IUD 000 : 00000000
I : 10001111
Limit switch for bar in the vice