72
Genie Distribution User Manual v1.6
© Tieline Pty. Ltd. 2015
4. Press the down
navigation button
to select
Algorithm
and press
.
5. Use the navigation buttons to select an algorithm profile or manually choose algorithm settings,
then press
.
6. Navigate to and select
TTL
and enter the IP Time-To-Live value, then press
. The TTL value
you need to use is dependent upon your network infrastructure. Please consult your network
administrator if you are unsure about how to configure this setting.
7. Select
Protocol
to select the audio protocol and adjust the
Send Audio Port
. Select
UDP/IP
+RTP
for RFC compliant IP streaming. Press
to save settings.
8. If required, enable
Auto Reconnect
and navigate to
Via
to specify which IP streaming interface
is used to dial this connection, e.g.
Primary
(port
ETH1
) or
Secondary
(port
ETH2
). Note: By
default
Any
will select
ETH1
if it is available and
ETH2
if it is unavailable.
9. Press the
RETURN
button when configuration is complete to navigate backwards to the
Connect IP
screen that the multicast IP address was entered into.
Important Note:
At this point you can navigate to
Save
on the
Connect IP
screen and
press
to save the settings as a custom program for subsequent recall and dialing. Use
