211
© Tieline Pty. Ltd. 2015
Genie Distribution User Manual v1.6
4. Check the
Rule Summary
and click
Create Rule
to save the settings.
Rule 2: Switch Different Control Port Inputs On to Connect and Disconnect
a Program
This rule is used to connect and disconnect a selected program when different codec control port
inputs are turned on.
1. Click the second rule in the
Rules panel
.
2. Click the drop-down arrows to select the control port input for connecting and the alternative
one for disconnecting.
3. Click the drop-down
Program
arrow to select an individual program which will be connected
and disconnected by the change in the control port input states.
4. Check the
Rule summary
and click
Create Rule
to save the settings.
Rule 3: Synchronise Local Control Port Input Status with a Remote Relay
Output
Use this rule allow a local codec's control port input to change the state of a remote relay output.
1. Click the fourth rule in the
Rules panel
.
2. Click the drop-down arrow to select the local control port input used to control a remote relay
output.
