242
Genie Distribution User Manual v1.6
© Tieline Pty. Ltd. 2015
setting if only one B channel is selected.
Multiple B Channel Bonding Config
A point-to-point audio stream can also bond multiple B channels to create higher bandwidth
connections.
1. Click the
Edit
button to configure settings.
2. In the following example, two B channels from
Module 2
have been selected within
Config 2
.
Note that
B Channel 1
in
Module 1
has already been selected in
Config 1
and is therefore
greyed out and unavailable in
Config 2
.
3. Configure the bonding setting that best suits the audio stream with which this
Config
is
associated.
Bonded or Unbonded
is the best setting in most situations.
Bonding Setting
Behavior
Unbonded Only
Unbonded single B Channel
Bonded or Unbonded (May
Bond)
Calls using the same algorithm from the same Tieline codec,
or sessionless calls, will attempt to bond when received. Calls
using incompatible algorithms will not be bonded
Bonded Only
Will only bond compatible algorithms. This mode will reject
incompatible calls which cannot be bonded, e.g. G.711 and
G.722
3. Click
Save
to apply changes to the
Config
.
Dial and Answer Route Settings in Programs
Dial Route
and
Answer Route
tags allow you to associate a B channel (or channels) in a
Config
with a particular incoming audio stream from either Tieline or non-Tieline codecs. This is not
necessary in simple point-to-point ISDN audio stream configurations, however it is very useful in
multiple audio stream codecs using multiple B channels. When dialing Tieline to Tieline over ISDN
using the Merlin or Genie family of codecs, you can configure a
Dial Route
in the dialing codec's
