160
Genie Distribution User Manual v1.6
© Tieline Pty. Ltd. 2015
audio stream. The audio for this audio steam will use analog or digital inputs and outputs
1 and 2 for both the dialing and answering codecs. If you need to change default port
settings on the codec from which the call originates, this will also need to be adjusted in
the answering codec using a custom program.
Click the drop-down arrows on the right-hand side of each text box to adjust the
Encoding
,
Sample rate
or
Bit rate
options.
Click to configure:
·
Auto Jitter Adapt
and the preferred auto jitter setting using the drop-down arrow
for
Buffer priority
, or
·
Fixed Buffer Level
and enter the
Jitter Depth
, which must be between 12ms and
5000ms depending on the algorithm you select.
·
Local
and
Remote FEC
settings if required.
Click the check-box to select
Enable Redundant SmartStream PLUS
and configure
dual Ethernet SmartStream IP streaming. Alternatively, click
Next
to configure
Auto
Reconnect
or a backup connection, whereby the alternative connection is dialed if the
primary connection fails.
By default, primary IP streaming is via
ETH1
. To achieve the maximum level of
redundancy select
Secondary
to configure redundant streaming from the secondary IP
port
ETH2
. The redundant stream uses
Send Audio Port 9001
by default and the
Return
Audio
Port
allocated is
Automatic
. Note:
Automatic
indicates that the codec will
arbitrarily allocate the return port value and send this information to the codec to which
you are dialing.
