THORLABS PDXC ORIC, Руководство пользователя

Страница: 16 / 58

ORIC
®
Piezo Stage Controller PDXC Chapter 4: Panel Operation
Rev B, September 23, 2021 Page 13
Figure 4.7 Set Velocity in Open-Loop Operation
4.2.5. Set Step Size in Open-Loop Operation
The STEP size of the stage is defined by how many increments the stage took within a single step. To set the
STEP size in open-loop operation of the D-Sub output mode, press the
“ENTER” button at the D-Sub mode main
screen to enter the menu, then follow the flow chart below.
Press “ENTER” to enter the menu screen
and
select “OPEN LOOP”
D-Sub mode main screen
Turn knob to select “VELOCITY”
and press “ENTER”
Turn knob to change the velocity value
and press “ENTER” to validate the setting