THORLABS KIM001 Скачать руководство пользователя страница 9

Страница: 9 / 63

Rev A Feb 2020

Page 6

Chapter 1 Introduction

1.3.4 APT Server (ActiveX Controls)

ActiveX Controls are re-usable compiled software components that supply both a

graphical user interface and a programmable interface. Many such Controls are

available for Windows applications development, providing a large range of re-usable

functionality. For example, there are Controls available that can be used to

manipulate image files, connect to the internet or simply provide user interface

components such as buttons and list boxes.
With the APT system, ActiveX Controls are deployed to allow direct control over (and

also reflect the status of) the range of electronic controller units, including the Piezo

Motor Driver K-Cube. Software applications that use ActiveX Controls are often

referred to as 'client applications'. Based on ActiveX interfacing technology, an

ActiveX Control is a language independent software component. Consequently

ActiveX Controls can be incorporated into a wide range of software development

environments for use by client application developers. Development environments

supported include Visual Basic, Labview, Visual C++, C++ Builder, HPVEE, Matlab,

VB.NET, C#.NET and, via VBA, Microsoft Office applications such as Excel and Word.
Consider the ActiveX Control supplied for the APT Piezo Motor driver unit.

This Control provides a complete user graphical instrument panel to allow the piezo

inertia motor unit to be manually operated, as well as a complete set of software

functions (often called methods) to allow all parameters to be set and motor

operations to be automated by a client application. The instrument panel reflects the

current operating state of the controller unit to which it is associated (e.g. such as

motor position). Updates to the panel take place automatically when a user (client)

application is making software calls into the same Control. For example, if a client

application instructs the associated Piezo motor Control to move a motor, the

progress of that move is reflected automatically by changing position readouts on the

graphical interface, without the need for further programming intervention.

Содержание KIM001
































































Результаты поиска

Содержание KIM001

Отзывы:

Похожие инструкции для KIM001

Бренды по названию

Популярные бренды

THORLABS KIM001, Руководство пользователя

Результаты поиска

Содержание KIM001

Отзывы:

Похожие инструкции для KIM001

Бренды по названию

Популярные бренды