THORLABS ITC4000 Series, Руководство по эксплуатации

Страница: 52 / 105

© 2018 Thorlabs 50
ITC4000 Series
3.16 Settings Memory
With the exception of the “LD ON” and "TEC ON"state, all settings will be saved when the
ITC4000 controller is powered down.
Additionally, the Settings Memories menu can be useful in saving several sets of specific set-
tings like: current limits, power limits, temperature limits, polarities, sensor input settings etc. for
the connected laser or TEC setup. Consequently, you can reload the saved setup parameters
from one of the eight memory spaces in the
Settings Memories menu.
At the positions 1 … 3, the parameters (for a temperature set point of about 25°C) are pre-
saved for the Thorlabs laser mounts. The parameter sets # 4…8 can be used to save your per-
sonal setups. If more space is required, and you don't need the pre-saved parameter sets # 1…
3, you may overwrite them.
Select the desired data set by turning the adjustment knob or by pressing Up / Down . Enter the
menu for the respective data set by pressing the Options key or the adjustment knob.
Save Current Settings To Memory allows to save all current laser controller settings. Note
that this will overwrite the settings stored in the selected data set.