THORLABS ITC4000 Series, Руководство по эксплуатации

Страница: 3 / 105

Foreword
Contents
4
1 General Information 5
6 1.1 Safety
8 1.2 Protection of Laser Diodes
9 1.3 Ordering Codes and Accessories
2 Getting Started 10
10 2.1 Preparation
11 2.2 Operating Elements
13 2.3 First Operation
13 2.4 System Preferences
3 Operating the ITC4000 Series 15
15 3.1 Connecting Components
15 3.1.1 Pin Assignment of the Laser Output Jack
16 3.1.2 Connecting the Laser Diode
16 3.1.3 Connecting an Optical Sensor as a Feedback Source
16 3.1.3.1 Connecting a photodiode
17 3.1.3.2 Connecting a voltage feedback source
17 3.1.4 Connecting the Laser Voltage Measurement
18 3.1.5 Connecting Interlock and LD ON Monitoring
18 3.1.6 Laser Protection "LD Enable" Input
19 3.1.7 Pin Assignment of the TEC Output Jack
20 3.1.8 Connecting a TEC Element
21 3.1.9 Connecting a Temperature Sensor
21 3.1.9.1 NTC thermistor
22 3.1.9.2 Current Temperature Sensors AD590 or AD592
22 3.1.9.3 Voltage Temperature Sensor LM35
22 3.1.9.4 Voltage Temperature Sensors LM335, LM235 or LM135
22 3.1.9.5 Platinum RTD Temperature Sensors PT100 or PT1000
23 3.1.10 Setting up the TEC Voltage Measurement
23 3.1.11 Connecting Interlock and TEC ON Monitoring
24 3.1.12 LDC Control Outputs
24 3.1.13 TEC Control Outputs
25 3.2 Power-up
26 3.3 LD Output Configuration
27 3.4 LD Source Setup
29 3.5 LD Source Setpoints
30 3.6 Setting the Power Feedback Source Parameters
30 3.6.1 Photodiode Input
32 3.6.2 Thermopile Input