THORLABS CLD101 Series, Руководство по эксплуатации

Страница: 70 / 92

© 2018 Thorlabs 68
CLD101x
6 Appendix
6.1 Technical Data
Specification CLD1015 Front Panel* Remote Control*
Current Control (Constant Current Mode); AG
Control Range 0 to 1.5 A
Compliance Voltage >4 V
Resolution 100 µA 50 µA
Accuracy ±(0.1% + 500 µA)
Noise and Ripple (10 Hz to 10 MHz, rms, typ.)
w/o Filter
with Filter
(Load 3.3
W
, current < 1.2 A)
10 µA
5 µA
Drift, 24 hours (0-10 Hz, typ.,
at Constant Ambient Temperature)
<50 µA
Temperature Coefficient <50 ppm/°C
Current Limit
Setting Range 1 mA to 1.5 A
Resolution 100 µA 50 µA
Accuracy ±(0.12% + 800 µA)
Photodiode Input (CG)
Photo Current Measurement Ranges 2 mA / 20 mA
Photo Current Resolution 100 nA / 1 µA 70 nA / 700 nA
Photo Current Accuracy ±(0.08% +0.5 µA) / ±(0.08% +5 µA)
Photodiode Reverse Bias Voltage 0.1 to 6 V
Photodiode Input Impedance ~0
W
(Virtual Ground)
Power Control (Constant Power Mode)
Photo Current Control Ranges 0 to 2 mA / 0 to 20 mA
Laser Voltage Measurement
Resolution 1 mV 200 µV
Accuracy ±(1% + 40 mV)
Laser Overvoltage Protection
Trip Voltage (typ.) 4.2 V
Modulation Input
Input Impedance 10 k
W
Input Voltage; max.
CC Mode
CP Mode ±10 V
±10 V
Small Signal 3dB Bandwidth, CC Mode
w/o filter
with filter
DC to 250 kHz
DC to 7.5 kHz
Modulation Coefficient, CC Mode 150 mA/V ±5%
Modulation Coefficient, CP Mode
Photo Current Range Low
Photo Current Range High 200 µA/V ±5%
2 mA/V ±5%
*) Via front panel the resolution is limited by the display. Via Remote Control a higher resolution is offered.