THORLABS CLD101 Series, Руководство по эксплуатации

Страница: 54 / 92

© 2018 Thorlabs 52
CLD101x
Command Description SCPI
:MODE {OFF|PROTection} Sets the ‘compliance voltage protection’ mode
:MODE? Returns the ‘compliance voltage protection’ mode
{:TRIPped]? Returns ‘compliance voltage protection’ tripped
TEC driver source subsystem commands
Command Description SCPI
SOURce2
R
:FUNCtion
R
[:MODE] {TEMPerature|CURRent} Sets TEC driver source function
R
[:MODE]? Returns TEC driver source function
R
:CURRent
R
:LIMit
[:AMPLitude] {MIN|MAX|<amps>} Sets limit current value
R
[:AMPLitude]? [{MIN|MAX}] Returns limit current value
R
[:LEVel][:IMMediate]
[:AMPLitude] {MIN|MAX|<amps>} Sets current setpoint value
R
[:AMPLitude]? [{MIN|MAX}] Returns current setpoint value
R
:DATA? [{MIN|MAX}] Returns the TEC current value
[:TEMPerature]
R
[:SPOint] {MIN|MAX|DEF|<temp>}
Sets temperature setpoint
R
[:SPOint]? [{MIN|MAX|DEF}] Returns temperature setpoint
R
:LIMit
R
[:UPPer] {MIN|MAX|<temp>} Sets settable temperature high limit
R
[:UPPer]? [{MIN|MAX}] Returns settable temperature high limit
R
:LOWer {MIN|MAX|<temp>} Sets settable temperature low limit
R
:LOWer? [{MIN|MAX}] Returns settable temperature low limit
R
:LCONstants
R
[:GAIN] {MIN|MAX|DEF|<value>}
Sets PID loop P value
R
[:GAIN]? [{MIN|MAX|DEF}] Returns PID loop P value
R
:INTegral {MIN|MAX|DEF|<value>} Sets PID loop I value
R
:INTegral? [{MIN|MAX|DEF}] Returns PID loop I value
R
:DERivative {MIN|MAX|DEF|<value>} Sets PID loop D value
R
:DERivative? [{MIN|MAX|DEF}] Returns PID loop D value
R
:PERiod {MIN|MAX|DEF|<sec>} Sets thermal load oscillation period
:PERiod? [{MIN|MAX|DEF}]
Returns thermal load oscillation period
Note In local operation mode (front panel operation ) it is not possible to operate the TEC-Source
(
SOURce2
) in current mode. When switching from remote mode to local operation mode the
source function automatically switches to temperature mode.