THORLABS CLD101 Series, Руководство по эксплуатации

Страница: 53 / 92

© 2018 Thorlabs
4 Write Your Own Application
51
LD current sensing subsystem commands
Command Description SCPI
SENSe3 Path to laser diode current sensing
R
[:CURRent][:DC]
R
[:DATA]? [{MIN|MAX}] Returns the measured LD current
LD voltage sensing subsystem commands
Command Description SCPI
SENSe4 Path to laser diode voltage sensing
R
[:VOLTage][:DC]
R
[:DATA]? [{MIN|MAX}] Returns the measured LD voltage
LD source subsystem commands
Command Description SCPI
SOURce[1]
R
:FUNCtion
R
[:MODE] {CURRent|POWer}
Sets LD driver source function
R
[:MODE]?
Returns LD driver source function
R
[:CURRent]
R
:LIMit
R
[:AMPLitude] {MIN|MAX|<amps>} Sets limit current value
R
[:AMPLitude]? [{MIN|MAX}] Returns limit current value
R
:TRIPped? Returns limit detection tripped
R
[:LEVel][:IMMediate]
R
[:AMPLitude] {MIN|MAX|<amps>}
Sets LD current setpoint value
R
[:AMPLitude]? [{MIN|MAX}]
Returns LD current setpoint value
R
:POWer
R
[:LEVel]
R
[:IMMediate]
R
[:AMPLitude] {MIN|MAX|<watts>} Sets LD power setpoint value
R
[:AMPLitude]? [{MIN|MAX}] Returns power setpoint value
R
:DIODe[:CURRent][:IMMediate] Sets LD power via photodiode current
[:AMPLitude] {MIN|MAX|<amps>}
Sets photodiode current setpoint
[:AMPLitude]? [{MIN|MAX}]
Returns the photodiode current setpoint
:AM
R
[:STATe] {ON|1|OFF|0} Enables (ON), disables (OFF) modulation
R
[:STATe]? Returns modulation state
R
TEC output subsystem commands
Command Description SCPI
OUTPut2 Path to TEC output
R
[:STATe] {ON|1|OFF|0} Enable (ON) or disable (OFF) TEC output
R
[:STATe]? Returns output state
R
:PON
[:STATe] {ON|1|OFF|0}
Sets the power-on TEC output state
R
[:STATe]?
Returns power-on TEC output state setting
R
:PROTection Path to TEC output protection
R
:TRANsducer[:TRIPped]? Returns temperature transducer failure tripped
:OTEMperature[:TRIPped]? Returns over temperature protection tripped
:CONNection[:TRIPped]? Returns connection failure protection tripped
:COMPliance (for firmware level 1.1.2 and higher)