THOMSON MEC 320, Руководство по эксплуатации

Страница: 63 / 93

MEC 320 GENSET CONTROLLER
PM079 Rev 0 07/06/08 63 Thomson Technology
Status text Condition Comment
LTO SEMI-AUTO
LTO AUTO
MPE MANUAL
MPE SEMI-AUTO
MPE AUTO
PM MANUAL
PM SEMI-AUTO
PM AUTO
Fire pump If the configurable input is
active.
Display locked If the ‘Access lock’ input is
activated, and the operator
tries to activate one of the
blocked keys.
GB tripped externally This info. will be shown, if
some external equipment has
tripped the breaker.
An external trip is logged in
the event log.
MB tripped externally This info. will be shown, if
some external equipment has
tripped the breaker.
An external trip is logged in
the event log.
TB tripped externally This info. will be shown, if
some external equipment has
tripped the breaker.
An external trip is logged in
the event log.
Power derate If the ‘power derate’ function
is activated and the nominal
power set point has been
decreased, this info. will
appear.
Idle run If the ‘Idle run’ function is
active, this info. will appear to
inform the user that the gen-
set will not stop, until a timer
has expired.
Idle run ###.#min. If the timers in the ‘Idle run’
function are active, this info.
will appear to inform the user
that the gen-set will not
start/stop, until a timer has
expired.
Compensation freq. Compensation is active. To inform the user that there
is a reason why the frequency
is not at the nominal setting.
Aux. test ###V ####s This info. is shown during a
battery test.
Deload This info. is shown when
decreasing the load of the
gen-set.
Starting DG(s) ###s When the start gen-set set
point is exceeded, this info. is
shown with the countdown of
the timer.
Stopping DG(s) ###s When the stop gen-set set
point is exceeded, this info. is
shown with the countdown of
the timer.
Start prepare This info. is shown during the
time the start prepare relay is
activated.