THOMSON CIM 3.0, Руководство пользователя

Страница: 9 / 81

SECTION 1 COMMUNICATION INTERFACE MODULE
PM055 Rev 2 00/08/31 Thomson Technology
3
The CIM provides the following advanced features:
•
Dedicated Microprocessor-based design provides fast operation without restricting
RTU operation.
•
One CIM module can provide interface to a complete networked RTU system. This
leads to a single telephone line connection per site rather than typical multiple line
solutions.
•
Internal 14.4 kbaud modem available for direct connection to telephone system.
•
Flexible design provides two fully configurable serial ports.
•
Standard plug-in telephone RJ45/RJ11 type jacks and DB9 computer ports provide
simple interconnection to system.
•
The ability to callout to a THS host station or pager when an RTU fault occurs frees
the user from continual monitoring. It also allows for immediate remote response to
problems.
3. Hardware Interface
The main features of the CIM are described as follows with reference to the following
figure.
COMMUNICATION
INTERFACE MODULE
3A
+/- -/+ G
DC Fault
Service
Power
Port Specifications
Port 1: Telephone line connection to internal modem
Port 2: RS232 DTE, RS422 or RS485 Serial port or ext. modem
Port 3: RS232 DCE, RS422 or RS485 Serial port
Notes:
1) See user manual for available Port 2 & 3 protocols.
2) The internal modem is disabled when a local Port 2 connection is made.
3) Port 3B is MEC 20 and TSC 800 pin compatible.
4) Refer to instruction manual for alternate port connections.
Port 3
Port 2
2A
2B
CIM
To Telephone Line
3B
Remote Terminal Unit
Power
8-35Vdc
MADE IN
CANADA
1
2
4
5
6
7
G:/ENGINEERING/PRODUCTS/ICS/1029009.VSD Rev. 2 98/12/04
14.4kb Internal Modem
3
8
Tx
Tx
Port 1