THOMSON CIM 3.0 Скачать руководство пользователя

Страница: 46 / 81

SECTION 2

THS 2000 SOFTWARE PROGRAM

PM055 Rev 2 00/08/31

Thomson Technology

4.1.3. Title Bar

The title bar displays the currently loaded site-list file. The site-list file is a

collection of one or more generation sites that has been configured and saved

previously. The site-list file can be opened, saved and printed from the main

menu or toolbar. The THS 2000 site-list files have the file extension .THS.

4.1.4. Main Menu

The main menu provides the access to the THS 2000 commands. Some

commands are available only under certain circumstances; when the command

is not available, it is grayed-out. For example, you will not be able to add a

controller (

Add

from the Controller menu) until you have created an initial site

(

Connect

from the

Site

menu or

New

from the

File

menu).

The main menu commands are also available using ALT-key combinations; the

underlined character indicates the key to press in combination with the ALT key.

Many of the important commands are available using function keys; these are

indicated in the pull-down menus.

4.1.5. Toolbar

The toolbar provides instant access to many important menu commands. When

the mouse pointer is floated over the tool item, a tool tip is displayed in the status

line portion of the status bar.

4.1.6. Controller Bar

The controller bar contains a button called List and a button for each controller on

the site. The controller buttons are labeled using the controller’s identification

number (id). Pressing a button on the controller bar will change the view to

display the selected controller or the controller-list view.

When the selected site is connected, the dot in the middle of the controller bar

button will indicate the status of the controller (green, yellow, red or black).

4.1.7. Status Bar

The status bar displays status messages and indicates connection status and

security status. The status line displays tool tips and various status messages.

The connection status indicates the state of the current connection, such as

Содержание CIM 3.0


















































































Результаты поиска

Содержание CIM 3.0

Отзывы:

Похожие инструкции для CIM 3.0

Бренды по названию

Популярные бренды

THOMSON CIM 3.0, Руководство пользователя

Результаты поиска

Содержание CIM 3.0

Отзывы:

Похожие инструкции для CIM 3.0

Бренды по названию

Популярные бренды