THOMSON CIM 3.0 Скачать руководство пользователя страница 39

Страница: 39 / 81

SECTION 2

THS 2000 SOFTWARE PROGRAM

PM055 Rev 2 00/08/31

Thomson Technology

The signal-type indicates the type of physical connection between the host and

CIM. The

RS-232/Modem

option indicates that a connection is via a standard

RS-232 cable or the internal modem (CIM Port 1). The

RS-422

and

RS-485

options are for multi-drop networks. The auto-detect option will allow the CIM to

attempt to decide for itself which physical connection is in use. The default

signal-type is auto-detect.

The other parameters are standard serial type parameters, including parity, data

bit size, stop bits and baudrate. The baudrate values can be

1200, 2400, 4800

9600, 14400 and 19200

. The receive-timeout parameter describes the amount of

time after receiving the last byte of the packet until the packet is processed

internally.

The

Restore Defaults

button will restore all parameters to their initial values,

which are no parity, 8 data bits, 1 stop bit, 9600 baud and 20 millisecond receive-

timeout.

The

Fixed Modbus Mode

option is for enabling the fixed Modbus mode for

operation with a Programmable Logic Controller (PLC). Once in fixed Modbus

mode, the CIM no longer requires a password to login, it is essentially always

logged-in to save the PLC from having to do so. All modem functions are

disabled when in fixed Modbus mode as well, to prevent unauthorized remote

access. The only way to disable fixed Modbus mode is to connect directly (via

RS-232 or RS-485) with THS 2000, which will disable fixed Modbus mode when

attempting to log in to the CIM.

Note: the receive-timeout and auto-detect signal-type features were not

supported in previous versions of the CIM and therefore their values appears

grayed-out and read-only when examined by THS 2000.

The protocol used on Port 2 is Modbus, as described in

Section 3

3.4.6. CIM Port 3

The Port 3 of the CIM is used to communicate with the controllers on the site.

The parameters for this port can be found under the

CIM Port 3

tab in the

Current

Site Properties

dialog box, as shown here.

Содержание CIM 3.0


















































































Результаты поиска

Содержание CIM 3.0

Отзывы:

Похожие инструкции для CIM 3.0

Бренды по названию

Популярные бренды

THOMSON CIM 3.0, Руководство пользователя

Результаты поиска

Содержание CIM 3.0

Отзывы:

Похожие инструкции для CIM 3.0

Бренды по названию

Популярные бренды