Theta Digital Casablanca II, Руководство пользователя

Страница: 80 / 125

70
Maximum Overall Level
Button # 5 ( MAX ) allows the user to set a maximum master level of the Casablanca II. This is especially useful in a
household where young relentless children and smart pets are accessible to the system.
Changing the Default MUTE Level
When the front panel or hand held remote MUTE button is pressed, the user can set the master volume level to mute
to a specific level. Editing this parameter is accessed by pressing button # 6 .
MUTE Off Trigger
The Casablanca II can be un-muted in 2 ways: pressing the MUTE button or the LEVEL UP / DOWN buttons. The user
has the option of overriding the use of the LEVEL UP / DOWN buttons so that only the MUTE button un-mutes the
Casablanca II. Setting the parameter (accessed via the A-D button) to MUTE allows only the MUTE button to un-mute
the Casablanca II whereas setting this parameter to M+V ( MUTE and VOLUME ) allows both the MUTE and LEVEL
UP
/
DOWN
buttons to un-mute.
Press the SETUP button once to return to the SETUP / GLOBAL page 1 sub menu. Press the A-D button once to go to
the second GLOBAL page, shown in figure 57.
Figure 57 - Front Panel Display of the SETUP/GLOBAL page 2 Sub Menu
Cursor Type
When editing jack or input select names, the character being edited can be indicated by blinking, a flashing cursor
below it, both, or no indication. This preference is set in the
SETUP / GLOBAL page 2 sub menu, button # 1 .
Displaying Mode Change Messages
As discussed in the MODE section of this manual, when the Casablanca II receives a Dolby Digital or DTS signal on
the currently selected input and the MODE is not the one required to process these signal formats, a message will
briefly occur on the LCD and OSD stating that the Casablanca II has received a certain format and is temporarily
changing the
MODE . This message does NOT come up by default but can be turned on by pressing button # 2 and
changing the value to ON .
Global Menu Password
If desired, access to the Global menus can be password protected. To set a password, press button # 3 and enter a
new password using the 1 - 6 buttons. As with all other passwords in the Casablanca II, using a 0 ( A-D button) will void
the password, making it as if there were none. Please refer to page 14 for additional information regarding setting
passwords.
When all settings are complete in this sub menu, press SETUP twice to return to the INPUT SELECT menu.
Setup Macros
The Casablanca II contains several macros that allow the user to perform multiple tasks at the press of a button. To
enter the Macros sub menu, press
SETUP , then MACROS (button # 3 ). The Macros sub menu appears, as shown in
figure 58.
Figure 58 - Front Panel Display of the SETUP / MACROS Sub Menu