Theta Digital Casablanca II, Руководство пользователя

Страница: 106 / 125

96
user has the option of overriding the use of the LEVEL UP / DOWN buttons so that only the MUTE button un-mutes
the Casablanca II. Setting the parameter (accessed via the A-D button) to MUTE allows only the MUTE button to un-
mute the Casablanca II whereas setting this parameter to M+V ( MUTE and VOLUME ) allows both the MUTE and
LEVEL UP / DOWN buttons to un-mute.
Press the SETUP button once to return to the SETUP / GLOBAL page 1 sub menu. Press the A-D button once to go
to the second GLOBAL page, shown in figure 99.
Cursor Type
When editing jack or input select names, blinking, a flashing cursor below it, both, or no indication can indicate the
character being edited. This preference is set in the SETUP / GLOBAL
page 2
sub menu, button # 1 .
Displaying Mode Change Messages
As discussed in the MODE section of this manual, when the
Casablanca II receives a Dolby Digital or DTS signal on the currently
selected input and the
MODE is not the one required to process these
signal formats, a message will briefly occur on the LCD and OSD
stating that the Casablanca II has received a certain format and is
temporarily changing the
MODE . This message comes up by default
but can be turned off. Pressing button # 2 and changing the value to
OFF
achieves this.
Figure 99 - Video Display of the
SETUP
/ GLOBAL Page 2 Sub Menu
Global Menu Password
If desired, access to the Global menus can be password protected. To set a password, press button # 3 and enter a
new password using the 1 - 6 buttons. As with all other passwords in the Casablanca II, using a 0 ( A-D button) will
void the password, making it as if there were none. Please refer to page 14 for additional information regarding
setting passwords.
When all settings are complete in this sub menu, press SETUP twice to return to the INPUT SELECT menu.
Setup Macros
The Casablanca II contains several macros that allow the user to perform multiple tasks at the press of a button. To
enter the Macros sub menu, press
SETUP , then MACROS (button # 3 ). The Macros sub menu appears, as shown in
figure 100.
Copy Macros
Buttons 1 and 2 are “copy” macros. COPY ALL INPUT PARAMETERS
(button # 1 ) will give the user the option of copying all INPUT SELECT
parameters of the currently selected input to one ( ANOTHER INPUT ) or
all other 11 input select buttons ( ALL INPUTS ). If the user chooses to
copy to one other input select button, they will then be asked to choose
which one, by input select name. If the currently selected
INPUT
parameters are to be copied to input select buttons 7 - 12 , press the A-D
button when given the choice of the destination INPUT SELECT button
to be copied to.
Button 2 allows the user to copy only the input parameters that are
focused on the speaker setups such as levels, delays, etc.
See Note and additional information on the next page.
Figure 100 - Video Display of the SETUP / MACROS Sub Menu