Theta Digital Casablanca II, Руководство пользователя

Страница: 74 / 125

64
This submenu allows the user to adjust the center, side and surround speaker delays and levels as well as the LFE ,
only when the MODE is DTS and for the currently selected input. When the Mode is anything other than DTS, all
settings in this sub menu will have no effect. As with the settings in the Dolby Digital Setup sub menus, these DTS
settings are interactive with those in the
SETUP/INPUT/LEVELS and SETUP / INPUT / DELAYS sub menus.
The levels and delays function exactly the same as the Dolby Digital ones above and on the previous page of this
manual, as does the LFE gain setting (button #
5 ) for DTS sources only. (The range is different for DTS LFE).
When all settings are made, press SETUP 3 times to return to the INPUT SELECT menu.
Setup Circle Surround
To access the Circle Surround Setup sub menu shown in figure 46, press SETUP / INP / A-D / CIRCLE SURROUND .
Figure 46 -
Front Panel Display of the SETUP / INP Page 2 / CIRCLE SURRND Sub Menu
This submenu allows the user to adjust the center, sides and surround speaker delays and levels when the MODE is
Circle Encoded, Non-encoded or Cinema, only. When the Mode is anything other than one of these three, the settings
in this sub menu will have no effect.
As with the settings in the Dolby Digital Setup sub menus, these Circle Surround settings are interactive with those in
the
SETUP/INPUT/LEVELS and SETUP / INPUT / DELAYS sub menus.
The levels and delays function exactly the same as the Dolby Digital ones on the previous 2 pages of this manual, for
Circle modes only. With Circle Surround, the user also has the option to make the front left/right imaging narrow or
wide. This is accessed via button #
5 .
When all settings are made, press SETUP 3 times to return to the INPUT SELECT menu.
Post Process
To access the Post Process submenu shown in figure 47, press SETUP / INP / A-D / POST PROC .
This sub menu allows the user to select an additional process to add to the incoming signal once it has already been
processed/decoded via the selected
MODE . Only one post process can be selected per input.
Figure 47 -
Front Panel Display of the SETUP / INP Page 2 / POST PROCESS Sub Menu
The available post processing consists of:
OFF. Which applies no further processing;
Stereo Front/Rear ( ST/FR ), which takes signals from the front and surround lefts, adds them together and outputs this
sum equally to the front left and surround left speakers. The same applies for the right front and surround speakers.
The process varies slightly, depending on whether the
MODE is matrix, stereo or mono.
Party , which takes parts of each original channels signal, blends them with al others and outputs this mix to all
speakers. In this way, each speaker will have a blend of all speakers.
Center Spread ( CNTR SPREAD ) is a process in which the center speaker level is reduced and added to the front
left/right speakers. It is enabled in this Post Process sub menu, and altered in the SETUP / INP / page 3 sub menu,
under the CTRSPD parameter.