Theta Digital Casablanca II, Руководство пользователя

Страница: 12 / 125

2
IMPORTANT NOTICE
I.
Due to the computer-based circuitry used in Theta products, it is imperative that the Casablanca II be
connected to a ground via its three wire AC power cord. It is important that the AC power outlet,
which the Casablanca II is plugged into, is actually grounded. Failure to do so will severely
compromise the performance, reliability and safety of use of the Casablanca II.
II.
It is also important to prevent contact with static electricity when connecting other components and
cables to the Casablanca II. When connecting cables, simply place one hand on top of the
Casablanca II and then grasp the metal “barrel” of the cable with the other hand and plug (unplug)
the cable into (from) the appropriate jack on the Casablanca II.
III.
The Casablanca II, as with all electronic equipment, is susceptible to static discharges. Resetting the
unit may be required if anomalies occur after receiving a static discharge. In this case, put the unit in
standby and turn off the rear panel power switch for 2 minutes, and then turn it on again.
IV.
Ventilation is an important issue when placing the Casablanca II in a system. Make certain that the
Casablanca II is placed in a well-ventilated area or rack unit.
V.
Please take note that some powerline conditioners defeat the AC power ground on their outlets. If
the intention is to plug the Casablanca II into a line conditioner, check with your dealer to make
certain that the particular conditioner that is intended for use DOES NOT DEFEAT THE AC
GROUND on its AC outlets.
VI.
DO NOT remove any cover panels from the Casablanca II, as there are no user serviceable
components inside. Refer servicing and updating to qualified service personnel only.
VII.
Should the Casablanca II need to be reset, it must be put in standby first via the front panel power
button. Then the rear panel power switch is to be turned off for at least 2 minutes.
VIII.
The Casablanca II can be susceptible to excessive RF. End caps in all unused inputs will improve
the sound quality and may reduce the susceptibility to RF induced anomalies.
Reference Manual Conventions
For clarity purposes, references to buttons, LED’s and display parameters will be shown in bold capital letters.
All functions to be performed from, and in reference to the front panel of the Casablanca II will be found in the
front section of this manual, whereas all functions to be performed using the hand held remote and/or viewed
on a video monitor will be found in the back, or last part of this manual.