Thermo Scientific SHKE8000 Series, Руководство по обслуживанию

Страница: 43 / 106

This control allows the shaker to be operated without heat or refrigeration.
To access this screen, press the down arrow, the up arrow, the Silence
button, and then the down arrow button four more times.
The screen shown at right will
appear on the display.
Press the Temperature button
beneath T-ctrl and the screen
shown next will appear.
Toggle the Temperature Control
with either the up (on) arrow or
the down (off ) arrow.
Pressing the Time, Speed, or Temp buttons returns the screen to the
previous (SwVers O-temp T-ctrl) display. If no buttons are pressed, the
display will automatically return to the Operating Screen after about 15
seconds, also saving the selection to memory.
The Model SHKE8000-7 Series Shaker has the ability to hold the product
at a specific temperature after operating for a predetermined time.
A typical example is shown at
right. In this example, the shaker
is operating at 250 RPM with
cabinet temperature at 37°C. The
06:30 time value in the lower left
corner of the display indicates that the shaker is counting down and will
stop motion in six and one-half hours.
The illustration at right shows
that time has counted down to
zero and the shaker platform has
stopped (zero RPM’s). The
temperature value of 5.0° in the
lower right corner of the display is the temperature at which the product is
being held. Hold will continue at this temperature until the Start button is
pressed or a new Hold or operating temperature is entered.
2-20 Model SHKE8000 Series Shakers Thermo Scientific
Section 2
Operation
Temperature Control
Hold Temperature
Control