Thermo Scientific SHKE8000 Series страница 102 Скачать руководство пользователя

Страница: 102 / 106

Model SHKE8000 Series Shakers 9-1

Thermo Scientific

THERMO FISHER SCIENTIFIC SHKE8000 SHAKER W

ARRANTY

USA

The W

arranty Period st

art

s two weeks from the date your equipment is shipped from our facility

This allows shipping time

so the warranty will go into ef

fect at approximately the same time your equipment is delivered.

The warranty protection extend

to any subsequent owner during the warranty period.

During the first year

, component p

art

s proven to be non-conforming in materials or workmanship will be rep

aired or replaced

Thermo’

s expense, labor included

. For an additional 4 years, component p

art

s proven to be non-conforming in materials or

workmanship will be rep

aired or replaced at

Thermo’

s expense, labor excluded

. In addition, the Orbit

al Shaker mechanism is

warranted for Unit Production Life, p

art

s only

, F

.O.B. factory

The mechanism is defined as the bearing assemblies. Unit

Production Life is defined as 10 years.

The warranty will be void if the equipment is altered without written authorization fr

Thermo. Inst

allation and calibration is not covered by this warranty agreement.

The

echnical Services Dep

artment must be

cont

acted for warranty determination and direction prior to performance of any rep

airs. Expendable items, i.e., glass, filters

light bulbs and lid gasket

s are excluded from this warranty

. Extended warranties are dependent on the unit

s being maint

ained

regularly as st

ated in the operation and service manuals.

Replacement or rep

air of component

s p

art

s or equipment under this warranty shall not exceed the warranty to either the equip-

ment or to the component p

art beyond the original warranty period.

The

echnical Services Dep

artment must give prior

approval for return of any component

s or equipment.

THIS W

ARRANTY

IS EXCLUSIVE

AND IN LIEU OF

ALL

OTHER W

ARRANTIES, WHETHER WRITTEN, ORAL, OR

IMPLIED. NO W

ARRANTIES OF MERCHANT

ABILITY

OR FITNESS FOR

ARTICULAR PURPOSE SHALL

APPL

Thermo shall not be liable for any indirect or consequential damages including, without limit

ation, damages relating to lost pr

of-

s or loss of product

our local

Thermo Sales Of

fice is ready to help with comprehensive site prep

aration information before your equipment arrives.

Printed instruction manuals carefully det

ail equipment inst

allation, operation, and preventive maintenance.

If equipment service is required, please call your

echnical Services Dep

artment at 1-800-438-4851 (USA

and Canada) or 1-

740-373-4763. W

e’re ready to answer any questions on equipment warranty

, operation, maintenance, service and special

applications. Out

side the USA, cont

act your local distributor for warranty information.

Rev

. 0 1/09

ISO 9001

REGISTERED

Содержание SHKE8000 Series











































































































Результаты поиска

Содержание SHKE8000 Series

Отзывы:

Похожие инструкции для SHKE8000 Series

Бренды по названию

Популярные бренды

Thermo Scientific SHKE8000 Series, Руководство по обслуживанию

Результаты поиска

Содержание SHKE8000 Series

Отзывы:

Похожие инструкции для SHKE8000 Series

Бренды по названию

Популярные бренды